09 Agu 051 Super Moly Grease Ep 2
Grease
DELTALUBE 051 Super Moly is an EP Lithium Grease made from lithium soap with Molydenum Disulfide added, high viscosity base oils and fortified with additives. It is formulated for use in a variety of operating condition, designed for a wide variety of industrial and automotive applications.
DELTALUBE 051 Super Moly EP 2 Grease is formulated from high quality base oil and lithium 12 hydroxiestearano soap. The combination of lithium Soap and high viscosity base oil plus effective additives make DELTALUBE 051 Super Moly EP Grease a unique grease prossessing outstanding water resistance, rust protection and shock load protection. These features plus a high load carrying capacity make it outstanding multipurpose grease. It is of the same high quality as the other lithium base grease with the additional benefits of Molydenum Disulfide which helps reduce friction and wear and provides an exstra measure of protection in tough of high temperature application. Oxidation & corrosion inhibitors are also included in the formulation. DELTABLUBE 051 Super Moly EP 2 Grease has excellent mechanical stability, which minimizes softening under severe shearing condition, can be used over a wide temperature range. It will not harden or decompose under severe working at elevated temperature.
CHARACTERISTIC
- Exceptional anti – wear and anti friction control
- High capacity to wear loads pressure and impacts
- High resistance to oxidation and flushing
- Protection against rust and corrosion
- Excellent mechanical stability
- Excellent pump ability for centralized systems
- Protection against contamination by dust and humidity
| TYPICAL SPECIFICATION | ASTM METHOD | |
| NLGI | D – 217 | 2 |
| Soap Base Type | D – 128 | Lithium |
| Color | Visual | Dark Gray |
| Appearance ( Texture ) | Visual | Soft |
| Working Penetration at 60 stroke 1/10 mm 25⁰ C | D – 217 | 265 – 295 |
| Mechanical Stability % of loss | D – 217 | 10 max |
| Dropping Point ⁰C ( ⁰ F ) | D – 2265 | 180 ( 356 ) |
| Flushing at 80 ⁰ C of loss | D – 1264 | 5 max |
| Pour Point ⁰ C ( ⁰ F ) max | D – 97 | – 15 ( + 5 ) |
| Flash Point ⁰ C ( ⁰ F ) min | D – 92 | 232 ( 450 ) |
| Oil Separation ( bleeding ) % | FTM791b 321 | 5 max |
| Shell Roll Test | – | Excellent |
| Stability of Oxidation 100 hrs. Psi | D – 952 | 15 max |
| Bearing Loss gr. | D – 1263 | 5 max |
| Resistance Test to Rust & Corrosion | D – 1743 | Pass |
| Extreme Pressure in Timken Load lbs OK | D – 2509 | 45 min |
| Anti – friction | Abs.Atom | MoS2 |
| Additive type | IR | EP, R & O |
| MINERAL OIL SPECS | ||
| Viscosity @ 210 ⁰ F | D – 88 | 70 – 85 |
| Viscosity of Base Oil at 100⁰ C, cSt | D – 445 | 12/16 |
| Viscosity Index, min | D – 2270 | 90 |